Specialty belts
Dry Can Belts
Double-angle CC belts designed for textile drying cans and long-center, serpentine drives. Their deep-groove, notched construction provides flexibility and transmits power from both sides of the belt.
TSB Industrial Supply helps buyers in Houston and across the United States source the right replacement. Send your existing belt number or drive details to confirm fit and availability.
CC profile & construction
- Cross section
- CC
- Width (CW)
- 15/16"
- Thickness (TH)
- 1-1/8"
- Power transmission
- Both sides
01Polyester cord
Multiple plies of high-modulus cord carry the load with minimal stretch and add stability during peak shock loads.
02Compression section
Synthetic rubber supports the cords evenly and compresses as the belt bends around the sheaves.
03Deep-groove notches
The notched construction increases flexibility. The deep-groove CC profile helps minimize belt rollover on long-center, serpentine drives.
04Heavy-duty cover
Rubber-impregnated, stress-relieved fabric protects the core and supports smooth power transfer.
Textile drying-can drives
These specialty belts are developed for the CC drives found in the textile industry, including drying-can equipment. The double-sided profile suits serpentine arrangements where power is transmitted from either side.
Recommended pulleys
Conventional C pulleys with QD, Taper Bushed or MST configurations. Confirm the drive requirements before selecting a replacement.
Ordering a matched set?
Dry Can belts are normally used individually, so matching is not required for a single-belt drive. If two or more belts will operate as a matched set on the same drive, specify that requirement when requesting your quote.
For sizes not listed, ask about availability. Minimum order quantities or extended lead times may apply.
Dry Can belt sizes & dimensions
CC600S: CC = double-angle cross section; 600 = pitch length in inches; S = notched cog construction. The table below lists outside circumference, not pitch length.
| Size | Outside circ. (in) | Outside circ. (mm) | Weight (lb) | Quote |
|---|---|---|---|---|
| CC210S | 214.1 | 5438 | 8.0 | Quote |
| CC240S | 242.1 | 6149 | 9.0 | Quote |
| CC270S | 272.1 | 6911 | 10.1 | Quote |
| CC300S | 302.1 | 7673 | 11.3 | Quote |
| CC330S | 332.1 | 8435 | 12.4 | Quote |
| CC360S | 362.1 | 9197 | 13.5 | Quote |
| CC390S | 392.1 | 9959 | 14.6 | Quote |
| CC420S | 422.1 | 10721 | 15.7 | Quote |
| CC440S | 442.1 | 11229 | 16.5 | Quote |
| CC450S | 452.1 | 11483 | 16.8 | Quote |
| CC480S | 482.1 | 12245 | 18.0 | Quote |
| CC540S | 542.1 | 13769 | 20.2 | Quote |
| CC550S | 552.1 | 14023 | 20.6 | Quote |
| CC600S | 602.1 | 15293 | 22.4 | Quote |
| CC640S | 642.1 | 16309 | 23.9 | Quote |
| CC660S | 662.1 | 16817 | 24.7 | Quote |
| CC670S | 672.1 | 17071 | 25.0 | Quote |
| CC680S | 682.1 | 17325 | 25.4 | Quote |
| CC700S | 702.1 | 17833 | 26.2 | Quote |
| CC720S | 722.1 | 18341 | 26.9 | Quote |
| CC750S | 752.1 | 19103 | 28.0 | Quote |
| CC780S | 782.1 | 19865 | 29.1 | Quote |
| CC800S | 802.1 | 20373 | 29.9 | Quote |
| CC840S | 842.1 | 21389 | 31.4 | Quote |
| CC900S | 902.1 | 22913 | 33.6 | Quote |
Listed sizes are references, not a statement of current TSB stock.
Source your replacement through TSB
Include the complete belt number, quantity, equipment details and any matched-set requirements. If the markings are worn, attach a photo and your measurements to the quote request. Our team can review the information before quoting.
Houston pickup: 4025 Willowbend Blvd #307, Houston, TX 77025. Call ahead to confirm stock. Nationwide shipping is available; ask for availability and shipping details with your quote.